Non-slip treatments, also known as grit applications are clear and do not alter the appearance of existing surfaces. Instead they make the area covered gritty and non-slippery and are usually installed on showers or bath bases, entire bathroom floors and other tiled surfaces. These take up to 48 hours to cure and dry. When cared for properly, these can last over 5-10 years.

Non-Slip Grit Application/ Anti-Slip Floor Treatment

Internal & external floors can become a falling risk when left untreated. MAM has introduced a new clear-coated product that will turn any slippery surface non-slip and safe! This application can be applied to tiles, plastic, polymarble shower bases, timber, concrete and even your old vinyl that just needs a touch-up. MAM will clean, prep, dry and treat the area all in one day. The treatment will leave your surfaces with a ‘grit’ feel, even if the surface is wet it will still be safe.

Non-Slip Treatment – Tiles – Permanent

Non-Slip Surface Treatment is invisible to the naked eye yet increases the slip resistance of any tiled flooring! Creating a safer floor surface and is cost-effective. This treatment etches into the existing tiles, modifying its structure to feel non-slip when wet. The treatment is barely noticeable and will never wear off. Subtle yet very effective.

After Care for Non-Slip Treatment

As the treatment actually modifies the floor rather than coating it, slip resistance is retained as long as the actual floor surface is not worn. However, it is essential that floors are kept clean and free of debris and contaminants. In kitchen applications, a high quality degreaser should be used regularly to eliminate grease and fats that can build up on the surface and create a barrier between the treated surface and the foot.

OUR SERVICES: Quote / Installation

Quote: To obtain a quote, please send the scope of works, measurements/diagrams & photos of site and reference MAM website where possible as an example.

Installation: MAM will install the works as per the scope and Australian Standards with skilled tradesmen. MAM offers quick installation and turnaround for standard stocked items.

Frequently Asked Questions (FAQ)

How long does the non-slip treatment last?

If the recommended drying period is allowed and proper care is taken, the treatment can last over 12 months.

How long does the treatment take to dry?

The treatment can take up to 48 hours to dry. During this time, foot traffic may leave marks.

What colour is the treatment?

The treatment is clear/transparent.

Will the treatment damage the existing flooring?

No, the treatment will not damage existing flooring. The only alteration to the existing surface will be a “gritty” feel to make the floor non-slip.

What is the aftercare required for the treatment?

We do not recommend the use of harsh bleach or chemicals to clean. Other than the drying period it does not require any specific aftercare.

Can this be applied to any surface?

The treatment can be applied to almost all surfaces. For certain surfaces like concrete we may do a part combination with paint and grit.

What preparation does the floor need prior to the treatment?

– For internal areas, we recommend moving anything on the floor that may impede the treatment such as mats, small furniture etc. These can be placed back again after 48 hours.

– For shower areas, we recommend you give the area a general clean up if possible and to not take a shower or get the area wet on the day of the scheduled treatment.

– For external areas, the area may need to be pressure or acid washed prior to treatment, MAM will take care of this. If required, MAM will come back another day to paint this.

Stay up to date with the latest MAM news and industry insights

Website built by: Chubby Solutions